FC F722V1 – stability, precision, full control
FC F722V1 is an engineered flight controller based on the STM32F722RET6 (216 MHz), designed for applications where processing speed, control accuracy and flexible integration with all modern FPV or unmanned platform components are critical.
The controller is equipped with a modern ICM42688P gyroscope with a separate low-noise power supply, which guarantees high accuracy even in vibration conditions. The built-in BMP280 barometer is responsible for stable altitude determination, and the 16 MB Blackbox allows you to record full telemetry for mission analysis or PID tuning.
Additionally implemented:
Separate DFU button – quick access to firmware mode without PC connection
8-pin ESC|FC loopback – compatible with most 4-in-1 ESCs without soldering
24V output – for connecting an initiation board or other high-current equipment
Gyro power filtering – to minimize noise and improve accuracy
FC F722V1 is:
Reliable real-time control
Highly compatible with FPV and standalone platforms
Minimum noise, maximum accuracy
The optimal solution for those who customize the system
Specifications
Processor (MCU):
STM32F722RET6, frequency up to 216 MHz
Sensors:
Gyroscope: ICM42688P with independent low-noise power supply
Barometer: BMP280
Memory:
Blackbox: 16 MB SPI Flash
OSD:
Built-in (for analog version)
Ports:
6 × UART
8 × PWM (support up to 8 motors)
1 × I2C
2 × ADC (V-BATT / CURR-ESC)
BEC / power:
Input voltage: 7-36 V (3-8S Li-ion/LiPo)
Output: 5 V / 3 A
Optional: separate 24 V output
Dimensions and installation:
Board dimensions: 36.5 × 37 × 5.2 mm
Mounting: 30.5 × 30.5 mm (M3 holes)
Weight: 11 g (without cables)
FC F722V1
500₴
Out of stock
FC F722V1 – stability, precision, full control
FC F722V1 is an engineered flight controller based on the STM32F722RET6 (216 MHz), designed for applications where processing speed, control accuracy and flexible integration with all modern FPV or unmanned platform components are critical.
The controller is equipped with a modern ICM42688P gyroscope with a separate low-noise power supply, which guarantees high accuracy even in vibration conditions. The built-in BMP280 barometer is responsible for stable altitude determination, and the 16 MB Blackbox allows you to record full telemetry for mission analysis or PID tuning.
Additionally implemented:
Separate DFU button – quick access to firmware mode without PC connection
8-pin ESC|FC loopback – compatible with most 4-in-1 ESCs without soldering
24V output – for connecting an initiation board or other high-current equipment
Gyro power filtering – to minimize noise and improve accuracy
FC F722V1 is:
Reliable real-time control
Highly compatible with FPV and standalone platforms
Minimum noise, maximum accuracy
The optimal solution for those who customize the system
Specifications
Processor (MCU):
STM32F722RET6, frequency up to 216 MHz
Sensors:
Gyroscope: ICM42688P with independent low-noise power supply
Barometer: BMP280
Memory:
Blackbox: 16 MB SPI Flash
OSD:
Built-in (for analog version)
Ports:
6 × UART
8 × PWM (support up to 8 motors)
1 × I2C
2 × ADC (V-BATT / CURR-ESC)
BEC / power:
Input voltage: 7-36 V (3-8S Li-ion/LiPo)
Output: 5 V / 3 A
Optional: separate 24 V output
Dimensions and installation:
Board dimensions: 36.5 × 37 × 5.2 mm
Mounting: 30.5 × 30.5 mm (M3 holes)
Weight: 11 g (without cables)
